怎么查PING值? [/quote]
开始》》运行》》输入cmd》》知道服务器地址》》开始ping [quote]原帖由 [i]风吹云淡[/i] 于 2006-9-2 10:13 发表
con那个极品数据哪里来的
我ping出来总丢包只有10％左右啊
但是我不比你流畅啊 [/quote]
猜测是某段路由崩了吧。。。。因为至少有人还算是正常的。。。。:ph34r: 但这个数据明显有问题
我在游戏上一步10S走路100％发动躬身弹影lv1 大部分人卡...但是有人正常(起码我有个朋友那里不卡)...他经验超爽 我上海2的 卡死了 什么时候才能好吖 享受个双倍就是不消停啊～ 免费服务器的也卡哦 丢包不是50%就是100%的人飘过... 明白了
明白为什么一会掉线一会走得动了
总丢包25％
ping出一个lost4的极品数据 电信怎么不把割断时间搞搞清楚，起码也等双倍结束再搞啊，靠了 呆在研究所的人爽死了， 不知道有没有关系呢~
上海电信定于2006年9月1日凌晨2：00——6：00、2006年9月5日凌晨3：00——6：00对上海热线外高桥机房进行割接，割接期间网络可能会出现瞬断的现象,可能造成上海、上海2、广州、华南、新生世代、免费体验服断线和无法登陆，其中2006年9月1日的割接还可能造成所有服务器提示没有剩余点数。给玩家带来的不便之处还请谅解。 确实是线路切割……
别的游戏也有卡的…… 电信切割把。。。。 [*'_']卡着卡着就习惯了 现在……起码卡在能动的范围内了
就是没事掉个线，还好还好 刚才居然还上去收了封信.....啊哈哈
然后瞬间掉线...
看都没看仔细... F:\Documents and Settings\S>ping 222.73.13.3
Pinging 222.73.13.3 with 32 bytes of data:
Reply from 222.73.13.3: bytes=32 time=219ms TTL=118
Reply from 222.73.13.3: bytes=32 time=220ms TTL=118
Reply from 222.73.13.3: bytes=32 time=218ms TTL=118
Reply from 222.73.13.3: bytes=32 time=219ms TTL=118
Ping statistics for 222.73.13.3:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 218ms, Maximum = 220ms, Average = 219ms
F:\Documents and Settings\S>ping 222.73.13.3
Pinging 222.73.13.3 with 32 bytes of data:
Reply from 222.73.13.3: bytes=32 time=218ms TTL=118
Reply from 222.73.13.3: bytes=32 time=218ms TTL=118
Reply from 222.73.13.3: bytes=32 time=219ms TTL=118
Reply from 222.73.13.3: bytes=32 time=222ms TTL=118
Ping statistics for 222.73.13.3:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 218ms, Maximum = 222ms, Average = 219ms
F:\Documents and Settings\S>ping 222.73.13.3
Pinging 222.73.13.3 with 32 bytes of data:
Reply from 222.73.13.3: bytes=32 time=220ms TTL=118
Reply from 222.73.13.3: bytes=32 time=218ms TTL=118
Reply from 222.73.13.3: bytes=32 time=219ms TTL=118
Reply from 222.73.13.3: bytes=32 time=220ms TTL=118
Ping statistics for 222.73.13.3:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 218ms, Maximum = 220ms, Average = 219ms
F:\Documents and Settings\S>
我这里看来还行 没丢包 看来是地图服务器完成割接了 咳咳，希望SD迅速找到所谓的“故障”了 看来是好了
大家表开会了
上线吧 [quote]原帖由 [i]KUSANAGI[/i] 于 2006-9-2 10:32 发表
F:\Documents and Settings\S>ping 222.73.13.3
Pinging 222.73.13.3 with 32 bytes of data:
Reply from 222.73.13.3: bytes=32 time=219ms TTL=118
Reply from 222.73.13.3: bytes=32 time=220ms TTL ... [/quote]
C:\Documents and Settings\Administrator>ping 222.73.13.3
Pinging 222.73.13.3 with 32 bytes of data:
Reply from 222.73.13.3: bytes=32 time=68ms TTL=119
Reply from 222.73.13.3: bytes=32 time=48ms TTL=119
Reply from 222.73.13.3: bytes=32 time=40ms TTL=119
Reply from 222.73.13.3: bytes=32 time=33ms TTL=119
Ping statistics for 222.73.13.3:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 33ms, Maximum = 68ms, Average = 47ms
C:\Documents and Settings\Administrator>ping 222.73.13.3
Pinging 222.73.13.3 with 32 bytes of data:
Reply from 222.73.13.3: bytes=32 time=14ms TTL=119
Reply from 222.73.13.3: bytes=32 time=16ms TTL=119
Reply from 222.73.13.3: bytes=32 time=14ms TTL=119
Reply from 222.73.13.3: bytes=32 time=14ms TTL=119
Ping statistics for 222.73.13.3:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 14ms, Maximum = 16ms, Average = 14ms
嗯。。果然完毕后ping值就上去了 貌似恢复了。。。 看来上海的已经完成了 PING值恢复
F:\Documents and Settings\S>ping 222.73.13.3
Pinging 222.73.13.3 with 32 bytes of data:
Reply from 222.73.13.3: bytes=32 time=15ms TTL=118
Reply from 222.73.13.3: bytes=32 time=16ms TTL=118
Reply from 222.73.13.3: bytes=32 time=16ms TTL=118
Reply from 222.73.13.3: bytes=32 time=15ms TTL=118
Ping statistics for 222.73.13.3:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 15ms, Maximum = 16ms, Average = 15ms
F:\Documents and Settings\S> 对了，ping的过程如何倒出成文本？ [quote]原帖由 [i]风吹云淡[/i] 于 2006-9-2 10:39 发表
对了，ping的过程如何倒出成文本？ [/quote]
单击cmd窗口左上的图标，属性
快速编辑模式
框选，然后回车就行
那个框内粘贴是用鼠标右键
页:
1
[2]